Test & Measurement

The OTDR II is the first tablet inspired OTDR that is handy, lightweight and rugged enough for any environment.\n\nWith a 7-inch outdoor enhanced touchscreen, the most efficient hand held display in the industry, it delivers an unprecedented user experience. Its intuitive user interface including onboard manual ensures a fast learning curve. Plus, its new and improved OTDR platform offers icon-based functions, instant boot-up, automatic macrobend finders as well as improved auto and real-time modes.

• iOLM (Intelligent Optical Link Mapper) - automatic configuration and multiple measurements on the same link provides the best possible measurements regardless of fibre configuration
• Onboard PDF reporting
• Macro bend detection
• Short attenuation (3.5 m) and event (0.8 m) dead zones for accurate location and characterisation of events
• Quad wavelength (850/1300/1310/1550) for both multimode and single-mode testing
• Each fibre may be tested at two wavelengths in a single Autotest
• Provides results in only a few seconds
• Interchangeable fibre adapters with a wide variety of available configurations
• Transfer test results to PC via USB flash drives or USB cable
• Optional video inspection micro scope to check connectors for cleanliness or damage
• Provides simple PASS/FAIL results and macro bend detection in single-mode fibres that helps users identify bends or kinks in the cable, saving time during installation and troubleshooting
• Small size for one handed operation
• Rubber over-mould for enhanced drop protection1 lithium-ion battery provides up to 12 hours operation
• Rugged carrying case for field use

Video inspection probe with universal adapter for 2.5 mm PC patchcord tips and soft pouch for OTDR II and OC I

• Fibre inspection probe (100x, 200x & 400x), universal 2.5mm adapter tips and soft pouch

SC/APC tip for bulkhead adapter for fibre inspection probe (R230002)

• for fibre inspection probe (R230002)

Pair of 2 Category 6A PL Adapters replacement tips for use with LanTEK III Cable Certifiers

• Category 6A PL Adapters replacement tips
• Pair of 2
• For use with LanTEK III Cable Certifiers

CAT6A RJ45 channel adapter for use with LanTEK III Cable Certifiers

• CAT6A RJ45 channel adapter
• For use with LanTEK III Cable Certifiers

SecuriTEST IP is an installation and troubleshooting tester for digital/IP, HD coax and analogue CCTV camera systems. With a single tester that can power, configure and document, SecuriTEST IP increases productivity from start to finish.

• Connect to various cameras using RJ45, Wi-Fi or BNC ports
• Power the camera with 12V from the Li-Ion battery or PoE/PoE+
• Faster camera login using the unique QuickIPâ„¢ function
• Comprehensive camera setup with aim, focus, PTZ, presets and network settings
• Provide proof of installation with PDF reports that show camera parameters and multiple video screen-shots
• Eliminate guess work with data cable and network troubleshooting tools

LANXPLORER Carry Case

Power Supply/Battery Charger

Battery Pack - rechargeable

Optical fiber multimode 2m duplex cable, LC/LC connectors

Optical fiber single-mode 2m duplex cable, LC/LC connectors

1 x RJ45 insert extraction tool, 10 x Lifejack RJ45 inserts

1 x Active remote set No. 2 to No. 6

1 x 1000BASE-ZX Fibre kit. Includes 1550nm SFP (Small Form factor Pluggable) ZX transceiver, LC/LC and LC/SC duplex singlemode cables and SC/SC duplex adaptor

Meet our In-Line network tester with active and passive troubleshooting capabilities for Ethernet connectivity and cabling issues in multimedia environments including copper, fibre and WiFi.\n\nLanXPLORER is a versatile, handheld device essential for a multitude of technology specialists operating in any office, large enterprise and industrial Ethernet environment.\n\nAll of the following would experience significant payback from a LanXPLORER: IT and network teams, facilities maintenance, network cabling companies, systems integrators, plus IT consultants and troubleshooters.

• Network Tests over Copper & Fibre
• Identification of active devices with Network Discovery function
• Comparison of active network devices against historical data with Network Verify
• DHCP client, Ping and Traceroute tests with VLAN support
• Full bandwith Layer 1, 2 and 3 Loopback device
• Diagnostic statistics including Top Ten talkers, protocols, error generators and packet size distribution
• Capable of saving 30 test reports with a total of 250 single entries
• Copper Features
• Best-in-class Wiremapper - tests cables by pin as well as by pair with split pair detection and length measurement
• Wire tracing fuction in combination with an Amplifier Probe
• Detection of PoE and PoE+, with voltage, current and power measurements in endpoint and In-Line modes
• Hub blink test with colour-switching on supported devices
• 10/100/1000 BASE-T support
• Network monitoring with In-Line tests and PC diagnosis function
• Monitoring of VoIP calls and quality, including RTP Jitter
• Optical Fibre Features
• Singlemode and Multimode SFP options
• 1000 BASE-SX, LX and ZX support
• Hub blink
• WiFi Features
• Identification of active Network Discovery function
• Comparison of active network devices against historical data with Network Verify
• DHCP client, Ping and Traceroute tests with VLAN support
• 802.11 b,g and n support
• Identification of access points, Service Set Identifiers (SSID), channels in use, signal strength and security settings
• Detection of channel conflicts

Superior performance, revolutionary fibre options and outstanding value makes LanTEK II the ultimate cable certification platform. Choose from three models that provide the test capabilities you need today with cost-effective upgrades should these change tomorrow; choose from 350 MHz - Class E/Cat 6, 500 MHz - Class EA /Cat 6A or 1000 MHz - Class FA /Cat 7A all with accuracy verified by ETL. Productivity on the job is assured by 11-second Class D/Cat 5e and a 14-second Class E/Cat 6 autotest times that include full graphical data storage. Certification costs and efficiency are further improved by a patented universal adapter system that lets you certify most cabling with off-the-shelf patch cords. This unique feature eliminates the need for proprietary permanent link adapters. The LanTEK II series also offers ultimate versatility with options

• LanTEK II-500: TIA/EIA Cat. 6A, ISO Class EA certifier w/ Cat. 6A adapters

The VDV II series are easy to use cable verification testers that check the integrity of copper cables commonly found in domestic, commercial or industrial voice, data or video installations, including telephone wiring, data network and video/security cabling.

• Accurate
• Fast
• Intelligent

The VDV II series are easy to use cable testers that check the integrity of copper cables commonly found in domestic, commercial or industrial voice, data or video installations, including telephone wiring, data network and video/security cabling.\nEmploying state-of-the-art technology, VDV II offers functionality not previously available in a wiremapper. The advanced wiremap engine accurately displays complex wiring faults instantaneously whilst TDR (Time Domain Reflectometry) aids troubleshooting and improves on-site productivity.

• Wiremap for miswires, split pairs, shorts and opens
• Analog tone generator
• Voltage protection
• Shielded cable testing
• Single screen results
• Larger 2.9 display

The VDV II series are easy to use cable testers that check the integrity of copper cables commonly found in domestic, commercial or industrial voice, data or video installations, including telephone wiring, data network and video/security cabling.\nEmploying state-of-the-art technology, VDV II offers functionality not previously available in a wiremapper. The advanced wiremap engine accurately displays complex wiring faults instantaneously whilst TDR (Time Domain Reflectometry) aids troubleshooting and improves on-site productivity.

• Utilizes TDR to accurately measure cable length and provide distance to fault information
• With comprehensive details on faults such as opens, shorts, crossovers and split pairs
• Has the capability to help identify service related issues

Tone Generator and Amplifier Probe Kit including pouch

• Cable tracing kit with advanced new features to give a complete signal tracing solution
• Kit includes: Tone Generator #62-160 Amplifier Probe #62-164 Soft Black Nylon Carrying Case Cable Assemblies and Flat Tip

Amplifier Probe

• Works with any Tone Generator (62-160) to identify wires
• Volume control for increased sensitivity and adjustable to suit work environment
• Recessed ON/OFF button prevents battery drain
• Battery low indicator
• 9 volt battery included

Multiple identifiers simplify cable labeling at the patch panel.

• Multiple identifiers simplify cable labelling at the patch panel
• Kit of 24 x RJ45 identifiers (#1 - #24) for use with VDV II

IDEAL - Network tester remote units - 12 ports

• Separate numbered remotes allow multiple cables to be tested more quickly

This separate numbered remote allows multiple cables to be tested more quickly.

• Kit of 12 x RJ45 remote units (#1 - #24) for use with VDV II
• Separate numbered remotes allow multiple cables to be tested more quickly

VDV II Main/coax remote #1 for use with VDV II

FiberTEK FDX:\nThe FiberTEK FDX option allows users to add full tier 1 standards compliant fibre certification capability to the LANTEK II certifier. \nThe only solution that gives complete one-step certification of horizontal & backbone cabling without swapping fibres or modules. Extremely fast fibre certification that is compliant with TIA/ISo/IEC certification standards. Available with both LED & VCSEL sources for 10/100Mbps & 1/10Gbps certification.

• Real-time power meter to aid troubleshooting of active equipment.
• More than 2x faster than any other fibre certification tester
• 5 test results with one single Autotest.

FiberTEK FDX:\nThe FiberTEK FDX option allows users to add full tier 1 standards compliant fibre certification capability to the LANTEK II certifier. \nThe only solution that gives complete one-step certification of horizontal & backbone cabling without swapping fibres or modules. Extremely fast fibre certification that is compliant with TIA/ISo/IEC certification standards. Available with both LED & VCSEL sources for 10/100Mbps & 1/10Gbps certification.

• Real-time power meter to aid troubleshooting of active equipment.
• More than 2x faster than any other fibre certification tester
• 5 test results with one single Autotest.

FiberTEK FDX:\nThe FiberTEK FDX option allows users to add full tier 1 standards compliant fibre certification capability to the LANTEK II certifier. \nThe only solution that gives complete one-step certification of horizontal & backbone cabling without swapping fibres or modules. Extremely fast fibre certification that is compliant with TIA/ISo/IEC certification standards. Available with both LED & VCSEL sources for 10/100Mbps & 1/10Gbps certification.

• Real-time power meter to aid troubleshooting of active equipment.
• More than 2x faster than any other fibre certification tester
• 5 test results with one single Autotest.

If you install or maintain data cabling, SignalTEK CT allows you to generate PDF test reports that prove installed links run at Gigabit Ethernet transmission rates.\n\nFor installers, this means having a cost-effective way to demonstrate that the copper cabling was installed correctly and is capable of supporting Ethernet applications. By proving real world performance, SignalTEK CT confirms a professional job reducing the risk of call backs.

• Data Cable Transmission Tester
• Data Cable Installation
• Proof of Performance

NaviTEK NT GbE Ethernet Troubleshooter - Plus model\nAdds test storage & support for CDP/LLDP port discovery\nThe new NaviTEK NT is a network tester for troubleshooting and maintenance of active and passive copper and fiber networks. Incorporating an improved graphical interface NaviTEK NT allows network technicians to pinpoint and solve network connectivity issues faster than ever before. Subsequently, tests can be saved as pdf reports and shared with colleagues and clients using the free IDEAL AnyWareâ„¢ app.

• Network troubleshooter (copper/fiber)
• PoE, service detection and port information
• Real time display of network traffic
• Test storage and PDF reporting
• Cable tracing/distance to fault (TDR)
• Supports IDEAL AnyWARE App