The Cel-Fi SOLO Smart Signal Booster is the most powerful carrier-grade solution available designed to solve mobile coverage problems for voice and data. With up to 100dB of gain, it covers up to 16,000 sq.ft/1,500 m² of indoor space per system. The easy-to-install solution includes a whip antenna and patch antenna or can be configured with an external wideband directional antenna and multiple server antennas for wider coverage.
Cel-Fi products are mobile network approved and fully meets the regulatory requirements in the UK and Ireland. The Cel-Fi commitment is to protect the operator's network, deliver the best in-building mobile performance, and be the easiest solution to install.
Licence exempt and fully meets Ofcom requirements SI 2018/399 (UK) and ComReg S.I.No.283 of 2018 (Ireland)
Quick and easy setup and installation
100 dB max signal gain covering an area 16,000 sq.ft. / 1,500 m² per unit
Available for O2, EE, Three, Vodafone and all Mobile Virtual Network Operators
Can easily switch between mobile networks via the Cel-Fi WAVE app
Boosts both 3G and 4G signal coverage simultaneously
Smart Signal Booster with IntelliBoost© Chipset - Unconditionally Network Safe
Remote monitoring and management with the Cel-Fi WAVE app
The Cel-Fi SOLO Smart Signal Booster is designed to solve mobile coverage problems for voice and data. With up to 100dB of gain, it is the most powerful carrier-grade solution available. The Cel-Fi SOLO covers up to 16,000 ft2 /1,500 m2 of indoor space per system and improves 3G and 4G mobile service by eliminating dead zones and dropped calls.
Cel-Fi products are mobile network approved and fully meets the regulatory requirements in the UK and Ireland. The Cel-Fi commitment is to protect the operator's network, deliver the best in-building mobile performance, and be the easiest solution to install.
Licence exempt and fully meets Ofcom requirements SI 2018/399 (UK) and ComReg S.I.No.283 of 2018 (Ireland)
Quick and easy setup and installation
100 dB max signal gain covering an area 16,000 ft2 / 1,500 m2 per unit
Available for O2, EE, Three, Vodafone and all Mobile Virtual Network Operators
Can easily switch between mobile networks via the Cel-Fi WAVE app
Boosts both 3G and 4G signal coverage simultaneously
Smart Signal Booster with IntelliBoost© Chipset - Unconditionally Network Safe
Remote monitoring and management with the Cel-Fi WAVE app

The system needs to detect a minimum signal outside of the building to operate.
Cel-Fi SOLO Bundle 1 includes:
Cel-Fi SOLO Smart Signal Booster
1 x Cel-Fi Whip Antenna
1 x Cel-Fi Patch Antenna
1 x 8m Coax Cable
1 x Wall mounting bracket

Installation
Quick Installation: The Cel-Fi SOLO comes with a Cel-Fi Whip Antenna and Cel-Fi Patch Antenna. These can be used to get a system up and running in minutes.
Advanced Installation: If you need a more powerful donor antenna you can connect the Cel-Fi SOLO to an outdoor Wideband Directional Antenna. If you need to get coverage to more areas of your building, you can use Splitters and connect to multiple Server Antennas

Technical Specifications
Simultaneously supports multiple channels with bandwidths from 5 to 20 MHz
Total system relay bandwidth of 60 MHz
Relays three (3) channels simultaneously (up to 20 MHz each)
Peaceful coexistence with adjacent Wi-Fi (2.4 GHz & 5 GHz), femtocells, and mobile devices
Automatic Gain Control (AGC) based on fast real-time echo-cancellation
Dynamic gain control always ensures maximum gain, best coverage in ever changing RF environments, without user intervention

Network Safe
Self-organising edge intelligence ensures that Cel-Fi SOLO do not interfere with other indoor wireless products such as Wi-Fi routers, Small Cells, and Distributed Antenna Systems (DAS).
High speed Automatic Gain Control ensures that Cel-Fi SOLO are unconditionally network safe and enables more simultaneous calls and higher data speeds.

Activate, Optimize, and Manage Cel-Fi products with the Cel-Fi WAVE App
Cel-Fi WAVE is the software application used for registering, setting-up, remotely monitoring, and updating Cel-Fi products. It provides a glance-able view to the state of your Cel-Fi environment and includes:
A dashboard overview of all your systems
Real-time data and performance metrics
Easy activation and registration
Operator changeover if you switch your network
Software update management
Users and group management

The Cel-Fi WAVE App is available for iOS, Android, PC and Mac devices.
*This unit supports multiple networks however only one network can be used at a time. The WAVE App can be used to switch between mobile networks.
For customers in Hebrides, Scottish Isles, Highlands and other remote areas in the UK: Due to Ofcom licence exemption rules, it is not permitted to relay 4G only signal. Please check on your service provider's coverage map, entering your postcode, to make sure you have Outdoor 3G Coverage in your area before purchasing. The current checker websites are: EE, Vodafone, O2, Three
Please call free for advice 0800 6122199

The CEL-FI Wideband Directional Antenna is an outdoor vertically polarized directional antenna; with 10dB gain in the low bands and 11dB gain in the high bands. The weather resistant housing is built with UV stabilized ABS plastic. Optimized for Cel-Fi products, the CEL-FI Wideband Directional Antenna can be used with the CEL-FI WAVE Antenna positioning app. The unit includes standard brackets for mounting, and can also be used with the Cel-Fi Pole Mount. A 10K ohm resistor is part of the antenna, for use with Nextivity Antenna Monitoring System

Boosts Cell Signal by up to 11 dBi
700 – 2700 MHz Frequency
Vertical Polarization
Uni-Directional

NOTE: 2M Cable Supplied with SMA MALE FITTING - See extension cable options below

Product Description
Nextivity Cel-Fi Antenna Pole Mount is ideal for any residential or commercial cell phone signal booster kit including Cel-Fi GO-X/ PRO/ QUATRA for outdoor antenna mounting. SKU # 591NF26000000000. Model: F26-100-000 / F26100000.

This Cel-Fi Pole Mount is an outdoor mount designed to secure an exterior cellular donor antenna outside the house or building. It can work for any cellular amplifier kit including the CelFi GOX/ PRO/ QUATRA. It works with the Cel-Fi WAVE Antenna Positioning Application. It has Nextivity's proprietary 7-position rotating base which enables antenna to be rotated in 45-degree increments, and locked into the optimal position.

Features:
Galvanized stainless steel.
Outdoor ready.
Supports pole mounting.
Supports 7-position with locking screw.
Flexible hole pattern for multiple mount types.
Works with poles 2" (or less) in diameter.

The Indoor Omni Antenna receives and transmits signal in a 360° pattern and are compatible with the 698 – 2700 MHz frequency ranges that include 3G and 4G signals. They come with an SMA Male Connector.
•3G/4G/LTE wideband cellular antenna
•SMA Male connector
•Omni-directional

NOTE: 20cm Cable Supplied with N Type FEMALE FITTING Click Here for N-Type Male to SMA Male adaptor


Suitable as the coverage antenna for the Cel-Fi GO-X

1M SMA Male to SMA Female LLC200A Coaxial Cables

Cable Specifications
Impedance: 50 ?
Loss dB/M @ 1.8 GHz: 0.52, @ 2.1 GHz: 0.64
Cable: LLC200A
Operating Frequencies: Up to 6 GHz

Dimensions
Core: 0.94 mm copper wire
Insulator: 2.79 mm GAS-FPE
Shield: tinned copper braid
Jacket: 4.95 mm PVC

5M SMA Male to SMA Female LLC200A Coaxial Cables

Cable Specifications
Impedance: 50 ?
Loss dB/M @ 1.8 GHz: 0.52, @ 2.1 GHz: 0.64
Cable: LLC200A
Operating Frequencies: Up to 6 GHz

Dimensions
Core: 0.94 mm copper wire
Insulator: 2.79 mm GAS-FPE
Shield: tinned copper braid
Jacket: 4.95 mm PVC

10M SMA Male to SMA Female LLC200A Coaxial Cable

Cable Specifications
Impedance: 50 Ohm
Loss dB/M @ 1.8 GHz: 0.52, @ 2.1 GHz: 0.64
Cable: LLC200A
Operating Frequencies: Up to 6 GHz

Dimensions
Core: 0.94 mm copper wire
Insulator: 2.79 mm GAS-FPE
Shield: tinned copper braid
Jacket: 4.95 mm PVC

20M SMA Male to SMA Female LLC200A Coaxial Cable

Cable Specifications
Impedance: 50 Ohm
Loss dB/M @ 1.8 GHz: 0.52, @ 2.1 GHz: 0.64
Cable: LLC200A
Operating Frequencies: Up to 6 GHz

Dimensions
Core: 0.94 mm copper wire
Insulator: 2.79 mm GAS-FPE
Shield: tinned copper braid
Jacket: 4.95 mm PVC

30M SMA Male to SMA Female LLC200A Coaxial Cable

Cable Specifications
Impedance: 50 Ohm
Loss dB/M @ 1.8 GHz: 0.52, @ 2.1 GHz: 0.64
Cable: LLC200A
Operating Frequencies: Up to 6 GHz

Dimensions
Core: 0.94 mm copper wire
Insulator: 2.79 mm GAS-FPE
Shield: tinned copper braid
Jacket: 4.95 mm PVC

Ordered on Requested Lead time = 5-7 Days

Three-way Low Power Splitter, 555–2700 MHz Application Indoor/Outdoor Color Black Inner Contact Plating Silver Interface N Female Outer Contact Plating Trimetal Dimensions Height 22 mm | 0.866 in Width 111 mm | 4.37 in Length 135 mm | 5.315 in Electrical Specifications 3rd Order IMD -130 dBc 3rd Order IMD Test Method Two +43 dBm carriers Insertion Loss at Frequency Band 0.65 dB @ 555–2700 MHz Average Power, maximum 80 W Dissipative Loss at Frequency Band 0.6 dB @ 698–2700 MHz Impedance 50 ohm Isolation at Frequency Band 17 dB @ 555–698 MHz | 20 dB @ 698–2700 MHz Operating Frequency Band 555 – 2700 MHz Peak Power, maximum 1 kW Power Rating, combining 0.5 W Power Rating, Splitting 80 W Reflected Power, maximum 5 W Split Loss 4.8 dB VSWR at Frequency Band 1.3:1 @ 698–2700 MHz | 1.58:1 @ 555–698 Hz Environmental Specifications Operating Temperature -25 °C to +85 °C (-13 °F to +185 °F) Relative Humidity Up to 100% Ingress Protection Test Method IEC 60529:2001, IP65 Packaging and Weights Height, packed 40 mm | 1.575 in Width, packed 130 mm | 5.118 in Length, packed 160 mm | 6.299 in Volume 832000 mm³ | 50.772 in³ Weight, gross 0.56 kg | 1.235 lb Weight, net 0.5 kg | 1.102 lb Regulatory Compliance/Certifications Agency Classification CHINA-ROHS Below maximum concentration value ISO 9001:2015

Nextivity Cel-Fi Wideband Panel Antenna for Cel-Fi GO X and Cel-Fi Solo
MPN: A52-V32-100
EAN: 5055821740975

Cel-Fi Whip Antenna A21-V33-100

The Cel-Fi HP Patch Antenna is a high performance cellular / LTE patch antenna that creates a large coverage area. The antenna has an adhesive mount for ease of installation.

Adhesive Mount
High Performance
Ground Plane Independent
IP69K

The Cel-Fi Mobile Mag Mount is one of the best-performing antennas in their footprint on the market. The antenna is an outdoor wideband mobile omni-directional antenna with 2 to 4 dB gain. The weather-resistant IP68 plastic casings are built to securely attach to cars, vans, caravans and motorhomes.

3G/4G/LTE wideband mobile antenna
SMA Male connector
Omni-directional
3m low loss high-performance cable
Ground plane dependent

824-960MHz
1710-2170Mhz
Active Gain+2dBi
3M RG174 Connecting Cable
3M Adhesive Sticker
Ground Plane Indepedent
SMA Connector

N Type Male to SMA Male Adaptor, 50 ohm,

The 19-34-2 from Multicomp Pro is a straight SMA jack to N plug adaptor.
Impedance is 50 ohm
Brass with nickel plated body
Brass with gold plated centre contact
Polytetrafluoroethylene insulator

1 Male and 2 Female SMA Connectors