Accessories

Hytera BL2010 Li-ION 2000mAh High Cpacity Battery Pack

• For the PD4, PD5 and the PD6 series.

BL1807-Ex Intrinsically safe lithium–ion battery (1800 mAh, ATEX)

• For PD7 ATEX terminals.

ECN21 Noise cancellation headset

• For the PD6 series, X1 series and the Z1p.

Hytera's DMR repeater can be connected to an IP-based communication network with multiple locations. The roaming function is used to provide radios in this radio network with voice and data services across cells. The RD625 repeater makes it possible to connect existing VoIP telephone systems to the DMR radio network. This allows DMR radio subscribers to hold half-duplex conversations with participants from the telephone network. Telephone subscribers have the option of making either individual or group calls in the radio network. The RD625 repeater can be operated both in analog and in digital mode and is completely compatible with analog systems currently in use. The device can automatically change between digital and analog mode depending on the type of receiver signal, saving both time and money by eliminating the need to configure frequencies and channels manually. The integrated power supply of the RD625 automatically chooses between alternating current and direct current. This makes it possible to provide a fail-safe radio signal by connecting the repeater to an independent source of direct current (UPS) in addition to the normal supply of power. If the AC supply fails, the RD625 switches to the second power supply automatically. The RD625's well-engineered design makes wall mounting easy using the optionally available wall bracket. This makes it possible to install the repeater flexibly and conveniently in buildings. A PC-based application can be used to monitor, inspect and control the RD625. The software supports network access from multiple points and allows administrators to monitor the DMR radio network. The RD625 combines transmitter and receiver components, the voltage supply and the duplexer (optional) in its compact chassis. To ensure a high level of security, the RD625 features a repeater access monitor that protect the radio network from unauthorized access attempts.

• Designed to provide reliable radio coverage in buildings and tunnels.
• UHF: 400 - 470 MHz

Belt Clip for Hytera PD355 Radio

• Belt Clip
• For use with PD355

Belt Clip for Hytera PD365 Radio

• Belt Clip
• For use with PD365

Nylon Strap for use with Hytera TC-320 and PD3 Series

• Nylon Lanyard Strap
• Compatible with TC-320, PD355, PD365, PD375, PD355LF and PD365LF

Micro USB Power Adapter for Hytera PD3 Series of Radios

• 5V DC/1A
• 100-240V
• Micro USB
• Power Adapter

Rapid Rate Charger for PD3 Radios

• Rapid Rate Charger
• Compatible with Li-on Batteries
• For PD3 Series Radios including PD355, PD365, PD375, PD355LF and PD365LF

Hytera Li-on Battery 2000mAh compatible with PD3 Radios

• 2000mAh
• Li-ion Battery
• 3.7V
• Compatible with PD3 Series Hytera Radios

C-Shape Earpiece Compatible with Hytera PD3 Series Radios

• Reliable PU wire with bullet-proof material (Kevlar®)
• Elastic wire for convenient adjustment of the length
• Ergonomic design for prolonged use
• Soft earset made of TPE materials
• Compatible with PD3 Series Radios

Programming Cable Compatible with PD3 Radios

• Programming Cable
• For Hytera PD3 series Radios

1700mAh Lithium Ion Battery

• 1700mAh
• 3.7v
• Lithium-ion Battery
• Compatible with Hytera TC320

Power Supply Adapter for Hytera TC320 Radio

• Power Supply Adapter
• Hytera TC320 Radio

The adapter works with a vehicle charger to serve as a voltage converter.

• Input Voltage 11~25v DC
• Output Voltage - 12v DC/1A
• Compatible with TC-446S, Power446, TC-610, TC-610P, TC-620, TC-700P, TC-780, PD405, PD415, PD505LF, PD565, PD605/PD605G, PD665/PD665G, PD685/PD685G, PD705/PD705G, PD785/PD785G, PD715 Ex, PD795 Ex, PT580H, PT580H PLUS, PT580H UL913, X1e, X1p and Z1p

Rapid Charger for the TC-320.

• Compatible with TC-320
• Supported Lithium-Ion and Lithium-Polymer batteries
• Input - 100 - 240 VAC
• Output - 5 VDC, 0.6 A
• 550 mA

Earbuds with earpiece (integrated microphone, separate PTT button) for TC-320 Radio

• Integrated PTT button in the microphone
• The PTT is securely attachable thanks to the the plastic clip
• Compatible with TC-320

Earbuds with earpiece (integrated microphone, separate push–to–talk button, VOX or PTT control) for TC-320 Radio

• Comfortable to wear with C-style earset
• Excellent audio clarity thanks to the large speaker
• PTT-in-line design
• Attach the PTT securely with the plastic clip
• Capable of volume control or PTT/VOX switch

Nylon hand strap

• Standard handstrap for many analog, DMR and TETRA radios.
• Compatible with TC-610, TC-610P, TC-620, TC-446S, POWER446, PD405, PD415, PD505, PD505LF, PD565, PD605/PD605G, PD665/PD665G, PD685/PD685G, X1e, X1p and Z1p
• Made from Nylon

Belt clip for the TC-320 radio

• Belt Clip
• Compatible with TC320 Radio

Carrying bag (PU) with belt loop for the TC-320 radio

• Carrying bag
• includes secure belt loop
• Compatible with TC-320 Radio

The BL1204 is a lithium-ion battery with a capacity of 1200 mAh. It can be used for the analog handheld radios Power446, TC-610, TC-610P and TC-620.

• Compatible with Power446, TC-610, TC-610P and TC-620
• Lithium-ion battery
• 1200 mAh
• 7.4 V

Li-Ion-Battery (2000 mAh) for use with the TC-610 and POWER446

• Compatible with TC-610/TC-620, TC610P/POWER446
• Li-Ion-Battery
• 2000 mAh
• 7.4 V
• Life cycle >
• 400

Power supply adapter for use with Rapid Charger

• PSU Adaptor
• For use with Rapid Charger

Hytera power adapter composed of a switching power supply and junction box, which can supply power for six chargers simultaneously.\n\nProvides protection against over voltage, over current and short circuit.\n\nFully compatible with most of Hytera radios.

• Output Voltage: 12VDC
• Output Current: 7A.
• Applications: a large-scale group and labor-intensive activities.
• Compatible Radios:Most of Hytera radios.

Charger for TC-610/TC-610P, TC620, POWER446 radios

• Compatible with TC-610/TC-610P, TC-620 and POWER446 radios
• Supports Lithium-Ion, Lithium-Polymer, Ni-MH and NI-Cd
• Input voltage
• 12 V DC, 1 A
• 850 mA

6-unit Charger for the POWER446, TC-610, TC-610P and the TC-620 radios

• Capable of charging six batteries or six radios with batteries attached simultaneously
• Auto selection of charging program based on battery type
• lntelligently monitoring the charging process
• Equipped with multiple charging protection mechanisms
• Available for wall and desktop installation
• Switching power and power cord (variable in different countries or areas.) included in the kit.
• Supports Lithium-Ion, Lithium-Polymer, NiMH and NiCd
• 100-240 VAC, 50/60 Hz, 1.5 A
• 1000 mA per pocket

Hytera SM08M3 - Speaker microphone - wired - black

• Easy use and compact body
• 3.5 mm audio jack (for use with receive-only earpiece)
• 360 degrees swivel metal clip
• Compatible with PD405, PD415, POWER446, TC-446S, TC-610, TC-620, PD505, PD505LF and PD565

Earphone with transparent acoustic tube can be used with several different basic sets.

• Compatible with ACM-01, ACN-01, ACN-02 and ACN-03

Earbud (on-mic PTT, acoustic tube) audio accessory for handheld radios.

• Flexible transparent acoustic tube for covert operations and comfort
• PTT-on-mic design
• PTT/VOX switch (VOX is available, if programmed in the radio)
• Compatible with TC-610, TC-620, TC-446S, POWER446, PD405, PD415, PD505, PD505LF and PD565

3-wire surviellance earpiece with a volume control knob and transparent acoustic tube (off-white)

• 3-wire surveillance earpiece
• Includes volume control knob
• Transparent acoustic
• Off White/Beige Colour

3-wire surviellance earpiece with a volume control knob and transparent acoustic tube (Black)

• 3-wire surveillance earpiece
• Includes volume control knob
• Transparent acoustic
• Black Colour

The EHM15 earbud is comfortable to wear, even for long periods of use, thanks to its D-earclip. The PTT button is integrated with the microphone in the cable, so that this headset manages with just one cable.

• Comfortable to wear with D-style earset
• Excellent audio clarity thanks to the large speaker
• PTT-in-line design
• PTT is securely attachable with the plastic clip
• Capable of volume control or PTT/VOX switch
• Compatible with TC-610, TC-620, TC-446S and POWER446

D Style Earset with Boom Mic In-line PTT & Volume Control

• Comfortable to wear with D-style earset
• Excellent audio clarity thanks to the large speaker
• PTT-in-line design
• PTT is securely attachable with the plastic clip
• Capable of volume control or PTT/VOX switch
• Compatible with TC-610, TC-620, TC-446S and POWER446

Earbuds without earpiece, push–to–talk button with integrated microphone, VOX or PTT control

• PTT-on-mic design
• PTT/VOX switch (VOX is available, if programmed in the radio)
• Compatible with TC-610, TC-620, TC-446S, POWER446, PD405, PD415, PD505, PD505LF and PD565

A plastic belt clip with elastic metal bracket. You can secure it to the radio via screws.

• Belt Clip
• Elastic Metal Bracket
• Secured via screws
• Comptible with POWER446 and TC-610P.

Nylon case with belt loop for use with the TC-610 and the POWER446 phones

• Half open design for easy installation
• Back-lock belt loop for easy use
• The standard nylon strap gives you more flexibility of wearing
• Compatible with TC-610, TC-610P, TC-620, TC-446S and POWER446

Waterproof bag for almost all Hytera radios.

• The interlined sponge provides extra protection for the terminal.
• Simple operation with higher reliability
• Applicable to use in rainy days or in damp locations, but no submerging is allowed.
• The standart nylon strap gives you more flexibility of wearing.
• Compatible with all except for small-sized radios

Programming cable (COM port) for use with TC-620 and TC-446S Radios

• Serial Cable
• Compatible with Power446, TC-446S, TC-610, TC-620 and TC-700 Ex PLUS

Programming cable (USB to serial) for use with the TC-620.

• With a built-in PL2303 USB chip, the cable supports plug and play capability.
• Compatible with Power446, TC-610, TC-620 and TC-446S
• NOTE:The PL2303 driver is required before initial use.

Universal programming cable (COM) for analog handheld radios.

• Serial Port
• Compatible with POWER446, TC-446S, TC-610, TC-610P, TC-620, TC-700P and TC-780
• For analog handheld radios

The BL1301 is a lithium-ion battery with a capacity of 1300 mAh for the TC-446S license-free analog two-way radio.

• For TC-446S
• Lithium–ion battery
• 1300 mAh
• 7.4 V

Li-Ion-Battery (1650 mAh) for the TC-446S.

• Compatible with TC-446S
• Li-Ion-Battery
• 1650 mAh
• 7.4 V

Charger for the TC-446S.

• Compatible with TC446S
• Li-ion battery supported
• Input 12 VDC, 1 A
• 800 mA

UHF antenna for the PD4 and the PD5 series.

• Compatible radios: PD405, PD415, PD505, PD565
• Type: UHF antenna, SMA female
• Length: 9 cm
• Frequency range: 400 - 470 MHz

VHF antenna for the PD4 and the PD5 series.

• Compatible radios: PD405, PD415, PD505, PD565
• Length: 12 cm
• Type: SMA female
• Frequency range: 136 - 147 MHz

VHF antenna for the PD4 and the PD5 series.

• Compatible radios: PD405, PD415, PD505, PD565
• Type: VHF antenna, SMA socket
• Frequency range: 147- 160 MHz

VHF antenna for the PD4 and the PD5 series.

• Compatible radios: PD405, PD415, PD505, PD565
• Type\\
• VHF antenna, SMA socket
• Frequency range: 160 - 174 MHz

VHF antenna for the PD5 series.

• Antenna VHF
• SMA connector
• 136-147MHz
• 1575mhz
• 17cm

VHF antenna for the PD5 series.

• Antenna VHF
• SMA connector
• 147-160MHz
• 17cm

VHF antenna for the PD5 series.

• Antenna VHF
• SMA connector
• 160-174MHz
• 17cm

Stout and long antenna (VHF/GPS) for DMR handheld radios.\n\nHelical antennas with helical brass core are durable and reliable for years of safe communication.

• Compatible radios: PD405, PD415, PD705/PD705G, PD785/PD785G, PD715 Ex, PD795 Ex, PD505, PD565
• Type: VHF/GPS stout and long antenna, SMA connector
• Frequency range: 136 - 174 MHz
• GPS: 1575 MHz

UHF antenna suitable for most PD series portable radios

• UHF
• SMA connector
• 400-470MHz
• 16cm

Nylon Chest Pack for almost all Hytera radios.

• Adjustable straps for enhanced comfort
• Designed for users (such as the policemen) who need to carry the radio and other tools
• Compatible radios: all except for small-sized radios
• Material: Nylon
• Size: 223 x 184 mm
• Weight: 277.8 g

Carrying bag (nylon) with belt strap for the PD4, PD5 and the PD6 series.

• Nylon
• Compatible with: PD405, PD415, PD505, PD505LF, PD565, PD605/PD605G, PD665/PD665G, PD685/PD685G, and Z1p

Battery optimizing system to analyze capabilities for your radio batteries.

• Able to charge six batteries or six radios with batteries attached simultaneously
• Easy access to battery information with the LCD
• Able to recondition
• Charging/discharging and battery strength detection
• Protection against overtemperature, overvoltage and overcurrent
• USB port available
• Pre-charge capability
• Charge current: 1000 mA per pocket

Battery Adapter for battery optimizing system MCA05.

• Compatible with: PD405, PD415, PD505, PD505LF, PD565, PD605/PD605G, PD665/PD665G, PD685/PD685G, PD605/PD605G, PD705/PD705G, PD785/PD785G, PD715 Ex, PD795 Ex, PT580H, PT580H PLUS, and PT580H UL913.

Battery adapter for charging stations MCA08 and MCA10.

• Compatible with: PD405, PD415, PD505, PD505LF, PD565, PD605/PD605G, PD665/PD665G, PD685/PD685G, PD705/PD705G, PD785/PD785G, PD715 Ex, PD795 Ex, PT580H, PT580H PLUS, PT580H UL913

The charger allows you to charge six batteries or radios simultaneously. It can be installed on the wall or desktop.

• Compatible radios: PD405, PD415, PD505, PD505LF, PD565, PD605/PD605G, PD665/PD665G, PD685/PD685G, PD705/PD705G, PD785/PD785H, PD715 Ex, PD795 Ex, PT580H, PT580H PLUS, PT580H UL913
• Input: 100 - 240 VAC 50/60 Hz 1.5 A
• Charging current: 1000 mA (per charging tray)
• Dimensions: 457 x 119 x 68 mm

This bracket is used to secure the installation of multi-unit chargers on the wall.

• Compatible with: PD405, PD415, PD505, PD505LF, PD565, PD605/PD605G, PD665/PD665G, PD685/PD685G, PD705/PD705G, PD785/PD785G, PD715 Ex, PD795 Ex (ATEX), PT580H, PT580H PLUS, PT580H UL913, X1e, X1p and Z1p

Hytera BL1502 - Battery - Li-Ion - 1500 mAh - for Hytera PD605

• Compatible Radios: PD405, PD415, PD505, PD565, PD605/PD605G, PD665/PD665G, PD685/PD685G

Remote speaker microphone (IP55, volume control high/low) audio accessory for handheld radios.

• Compatible radios: TC-610, TC-620, POWER446, PD405, PD415, PD505, PD505LF, PD565
• High/low volume control
• High quality speaker and noise cancelling microphone enable high audio clarity in noisy environment
• 3.5 mm audio jack (for use with receive-only earpiece)
• Compliant with IP55
• Operating temperature: -30 - 65 °C
• Protection against dust and moisture: IP55
• Size: 82 x 58 x 27 mm
• Weight: 141 g

Earbud with On-MIC PTT (RoHS)\n\nApplication: for users engaged in retailing, entertainment, hospitality, food service and community management industries, as well as public security areas.

• Split structure, convenient to use
• Ergonomic design,for long time use
• Flexibility to change, to facilitate the different users
• According to the need to choose the suitable ear tips.
• Works with: TC-510, TC-585, TC-500S, TC510, TC-610, TC-620, TC-700, TC446S, TC508 and Power446

Earpiece in C module with Inline-MIC PTT(RoHS)

• Split structure, convenient to use
• Ergonomic design,for long time use
• Flexibility to change, to facilitate the different users
• According to the need to choose the suitable ear tips.
• Works with:TC-510,TC-585,TC-500S,TC510,TC-610,TC-620,TC700,TC446S,TC508,POWER446

The ACM-01 consists of a PTT and microphone controller and can be used with several different Hytera earphones: ES-01, ES-02, EH-01, EH-02. It is protected against dust and moisture according to IP54.\nThose earphones can be connected to the ACM-01 via the 3.5-mm jack plug. This concept allows to replace the earphones fast and easily. In case of a malfunction, it is not necessary to replace the whole audio set.

• Earphones can be connected or replaced easily
• Ergonomic design for comfortable wearing during long periods of use
• Flexible application possibilities by different earphone models
• Compatible earphones: ES-01, ES-02, EH-01, EH-02
• Compatible radios: PD405, PD415, PD505, PD505LF, PD565, Power446, TC-446S, TC-610 and TC-620
• Protection against dust and moisture: IP54

Earphone connectable to basic audio sets.

• Can be used with several different basic sets.
• Elasticity wire design
• Ergonomic structure design
• Reliable PU wire designed with bullet-proof material
• Compatible basic sets: ACM-01, ACN-01, ACN-02, ACN-03

Earphone with C-hook can be used with several different basic sets.

• Can be used with several different basic sets (with PTT and microphone)
• Ergonomic design for long wearing
• Reliable cable made of bullet-proof material (Kevlar)
• Compatible basic sets: ACM-01, ACN-01, ACN-02, ACN-03

Large earphone with hook can be used with several different basic sets.

• Compatible basic sets: ACM-01, ACN-01, ACN-02, ACN-03

Data from reading the POA71 Patrol Point and POA72 Patrol Tag is sent by the radio over RF. If the data cannot be sent over RF as the radio is out of range, the last point read and be re-sent over RF by pressing a side key when the radio is back in range. If several points have been scanned out of range, these can be downloaded onto the Patrol Software by physically connecting the PD415 to the computer with the relevant cable.

• Compatible radios: PD415