Multiple Line Analogue BRI & PRI GSM Gateways Fixed Cellular Terminals

NEW PRODUCT
The SCG-4QE is a 1U rackmount gateway equipped with 4 SIM modules to allow 4 simulatneous calls.
•Provides accurate reverse polarity billing signal
•Displays Caller ID
•Add prefix code automatically: The unit can be set up to add the local area code or other prefix as necessary.
•Locking wireless terminal, locking SIM card,locking service provider and locking districts (Optional)
•Parameter management:Parameters can be modified by hand via the connected Telephone
•Set up or cancel call diverting
•PBX Support
•The volume of voice: microphone volume and speaker volume can be adjusted separately
Environmental Temperature -10°C to +40°C
Relative Humidity 10% to 95%
Air Pressure 86 Kpa to 106 Kpa
Environmental Noise =60dB(A)
Working Frequency Automatically switch: GSM850Mhz /900 MHz/ 1800MHz/ 1900Mhz
Frequency Stability Better than 2.5 PPM
Signal Sensitivity -103dBM
Transmit Power <2W
Power supply AC 220V/5V
Dimension: 59×37×20 (cm) G.W.: 5.0kg
EAN:0634654174673

**OUT OF STOCK**

The CGW-T4 Cellular Gateway is compatible with the analog trunk interfaces of the PBX and lets you make cellular calls from your telephone system, eliminating unnecessary interconnection fees to your landline carrier. The CGW-T4 gateway comes with built-in LCDs to indicate signal strength, operational status and cellular operator name to simplify maintenance. Features:- Toll Restrictions • Call Duration Control • DTMF Programming and Control • CLIP / CLIR • SIM PIN Control • Roaming • Gain Control • Reverse Polarity Support • Pulse Drop Support - CLIP/CLIR, Gain control, GSM support: 900/1800, 850/1900 MHz CDMA support: 800/1900 MHz UMTS* 2.4GHz SIM card (plug in, small): 3V, Receiver sensitivity: -103dBm, Power supply input: 110VAC, 60Hz / 220VAC, 50Hz.

19" Chassis for Rack Mounting. Single Antenna, perfect solution for installations needing multiple sims. Each unit can use different network sims at the same time, Orange T-Mobile, Vodafone and O2 all in one box.
This unit combines 4 x GSM channels into a single box - the unit provides 4 x GSM channels for 4 calls. The unit connects to the Analogue Trunk Ports on a telephone system - the benefit is a single power supply and a single Hi-Gain GSM antenna (using the 4 way antenna combiner)
IN STOCK FOR NEXT WORKING DAY DELIVERY

Same as standard WT204 / WT248 only will work at 2100Mhz for 3G networks so is compatible with the network "3"
**PLEASE NOTE THIS PRODUCT HAS A DELIVERY LEAD TIME OF 7-10 DYAS**

**PLEASE NOTE THIS PRODUCT HAS A DELIVERY LEAD TIME OF 7-10 Days**

This unit combines 8 x GSM channels into a single box - the unit provides 8 x GSM channels for 8 calls. The unit connects to the Analogue Trunk Ports on a telephone system - the benefit is a single power supply and a single Hi-Gain GSM antenna (using the 8 way antenna combiner)

The CGW-I is a ISDN-BRI Cellular Gateway that lets you call cellular numbers from your ISDN telephone system, benefiting from low business tariffs, bypassing your landline carrier and eliminating interconnection fees.
• Intelligent Routing - Return up to 1,500 mobile calls directly to the calling Direct Dial-In (DDI) • MSN Routing • Incoming & Outgoing Calls Control
• Call Diversion • Toll Restrictions • Redirect Calls • Call Duration • DISA • Full Device Control • Maintenance Alarms • Statistics • CDR - log for up to 2,500 records • Balance Call Distribution • Prepaid SIM Card Administration
Management & Monitoring
Programming: GUI : Maintenance alarms: E-mail/SMS : Statistics for each SIM : CDR (no. of records): 2,500 : Prepaid SIM card administration
Control & Maintenance
CLIP/CLIR : SIM protection from unauthorized removal : Dialing mode support: Overlap / En Block : Gain control : Network lock
System specifications
No. of cellular modules in each board/system: 2
GSM support: 900/1800, 850/1900 MHz
CDMA support: 800/1900 MHz UMTS* 2.4GHz No. of SIM cards per card/system: 1/2 SIM card (plug in, small): 3V Protocol support: EuroISDN
Receiver sensitivity: -103dBm Power supply input: 110VAC, 60Hz / 220VAC, 50Hz Power supply output: 9VDC, 1.5Amp
Hardware Specification
Indicator: LCD
Dimensions (H*W*D): 34*321*312 Weight: 0.8 Kg/ 1.76 Lbs Operating temperature: 0oC-45oC / 32oF-113oF Relative humidity: 5-95% Installation: Wall mounting Accesories Antennas: Omni - 2.5 db SMA
EAN:0634654174666

IN STOCK FOR NEXT WORKING DAY DELIVERY

The 2N® BRI Lite (GSM router) connected to a PBX ISDN port (BRI, So) transmits GSM services to ISDN user terminals. In addition to cost-efficient calls, it provides the following services: calling line identification presentation (CLIP), connection status displaying, advice of charging (AOC), SMS send/receive using the ISDN telephone set, and billing data recording. DISA provides DDI from the GSM network. The ISDN BRI GSM Gateway (ISDN router) welcomes the calling party with a DISA message and receives the number in the DTMF mode. Then, it converts the number into the DDI (in the PTP configuration) or MSN (in the PTMP configuration) mode. The least-cost routing (LCR) service helps establish connection alternatively by analyzing the number (e.g. via the "netcall", etc.). The originally dialed number is completed as required by the Gateway program setup. All called numbers, including connection date and time, are recorded in the 2N® BRI Lite GSM Gateway buffer. Outgoing calls are checked by the call barring table, which disables expensive calls.
.
DELIVERY 1-2 DAYS

This unit does not require dedicated BRI ports on PBX - can sit between PBX and BRI Landline trunks.
The 2N® BRI Lite (GSM router) connected to a PBX ISDN port (BRI, So) transmits GSM services to ISDN user terminals. In addition to cost-efficient calls, it provides the following services: calling line identification presentation (CLIP), connection status displaying, advice of charging (AOC), SMS send/receive using the ISDN telephone set, and billing data recording. DISA provides DDI from the GSM network. The ISDN BRI GSM Gateway (ISDN router) welcomes the calling party with a DISA message and receives the number in the DTMF mode. Then, it converts the number into the DDI (in the PTP configuration) or MSN (in the PTMP configuration) mode. The least-cost routing (LCR) service helps establish connection alternatively by analyzing the number (e.g. via the "netcall", etc.). The originally dialed number is completed as required by the Gateway program setup. All called numbers, including connection date and time, are recorded in the 2N® BRI Lite GSM Gateway buffer. Outgoing calls are checked by the call barring table, which disables expensive calls.
DELIVERY 1-2 DAYS

Telecom FM GSM Route BRI - 2 Channel ISDN2 GSM Gateway for connection to ISDN2 trunk of PBX
END OF LIFE - OUT OF STOCK - Please call us

The CGW-PX offers an integrated solution combining the proven capabilities of our CGW-P flagship solution together with a powerful VoIP Gateway. The solution offers a quadric connection from fixed-to-mobile and to IP via the office PBX. Through the PRI connection, corporations can now make VoIP calls from their mobile phones and vice versa, calls from office extension to mobiles or VoIP calls. • 4 connections- 3 PRI: PSTN/PBX/Cellular and VoIP connection • Intelligent Routing - Return up to 1,500 mobile calls directly to the calling DDI (Direct Dial-In) • Least Cost Routing (LCR) - Up to 20 tables • Number portability support • Full Device Control-Local & remote configuration • Maintenance alarms • CDR support • Incoming & Outgoing Calls Control • User friendly GUI • 19 inch rack mounting • Prepaid capability • 4 SIM per cellular channel • Up to 16 cellular cards • Up to 128 SIMs per system • Supports: CDMA, GSM, UMTS* PRI • Dialing Mode Support (Overlap/ En Block) • PRI grouping • E1/T1 CAS VoIP • SIP • Voice codec-G.711/G.726/G.723.1/ G.729A • IP transport-RTP/RTCP per IETF RFC3550 & 3551• Fax-T.38 compliant (real-time fax) • Echo cancellation- G.165 & 168 with 32, 64 or 128 tail length • Interface-10/100 BaseT • Digital PSTN protocols: • CAS MF-R1: T1 CAS (E&M, loop, features group D, E911CAMA) • E1 CAS R2 MFC • ETSI/ EURO ISDN, ANSI NI2, variants DS100, 5ESS, QSIG
GUI Maintenance alarms: E-mail/SMS Statistics for each SIM CDR support Prepaid SIM card administration CLIP/CLIR SIM protection from unauthorized removal Dialing mode support: Overlap / En Block Gain control Network lock No. of cellular modules in each board/system: 2-32 GSM support: 900/1800, 850/1900 MHz CDMA support: 800/1900 MHz UMTS* 2.4GHz No. of SIM cards per card/system: 4/128 SIM card (plug in, small): 3V Protocol support: EuroISDN Receiver sensitivity: -103dBm Power supply input: 110-250VAC, 50-60Hz VoIP Voice codec: G.711, G.726, G.723.1, G.729A IP transport: RTP/RTCP per IETF RFC3550 & 3551 Digital PSTN protocols: T1 CAS, E1 CAS R2, MFC
Indicator: Led - Dimensions (H*W*D): 132.5*344*483mm/ 52.1*135.4*190.1” - Weight: 8.5Kg/ 18.76 Lbs - Operating temperature: 0oC-45oC / 32oF-113oF - Relative humidity: 5-95% - Installation: 19” rack, 4U - Antennas: Directional- 7.5db , Onmi- 2.5 db
* future option

IN STOCK CALL FOR DELIVERY/INSTALLATION INFO

The CGW-PX offers an integrated solution combining the proven capabilities of our CGW-P flagship solution together with a powerful VoIP Gateway. The solution offers a quadric connection from fixed-to-mobile and to IP via the office PBX. Through the PRI connection, corporations can now make VoIP calls from their mobile phones and vice versa, calls from office extension to mobiles or VoIP calls.
IN STOCK - CALL FOR DELIVERY/INSTALLATION INFO

The CGW-PX offers an integrated solution combining the proven capabilities of our CGW-P flagship solution together with a powerful VoIP Gateway. The solution offers a quadric connection from fixed-to-mobile and to IP via the office PBX. Through the PRI connection, corporations can now make VoIP calls from their mobile phones and vice versa, calls from office extension to mobiles or VoIP calls.
IN STOCK CALL FOR DELIVERY/INSTALLATION INFO